Long Reach Ethernet Extender, VDSL over a point to point RJ45 UTP cable. Up to 80 Mbps at 200 meters, 30 Mbps at 600 meters.

Transparent Ethernet connection up to 1200 meters
Medium range from 11 - 80 Mbps up to 1200 meters
Long range from 14 - 89 Mbps up to 700 meters
Range depends on cable quality etc.
Note: 2 pcs. to make a connection.
1 x RJ45 for LAN
1 x RJ45 for Link (RJ11 can also fit in the female connector
DIP switch to select Master or Slave mode
Dimensions: 97 x 70 x 26 mm
Cabinet: Metal
Weight: 189g
Supply voltage: 5VDC/2A
Temperature: 0 - +50°C

ETH-VDSL2+AL
1,120.00 DKK
Tax excluded
Quantity
Physically in stock  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

To meet the needs of long distance Ethernet over UTP or telephone line applications, we can offer a new generation of Ethernet over UTP Extender. It has 1 x 10/100 BASE-TX RJ45 port and 1 x UTP RJ45 connector with a compact metal housing, which makes the placement of the device convenient. the extender provides a total duplex data rate of 100 Mbps, which can extend a maximum distance of up to 1.2 km. It is ideal for distance extension and signal conversion by transferring Ethernet data from the UTP cable or telephone cable to another 100 meter UTP cable for any type of IP network device such as HD IP camera, wireless access point, NVR and digital signage.

A set of (2) VDSL Extenders could be used to connect two local area networks that are located in different locations. Through the Cat.5e UTP cable or telephone line, it could configure a 100Mbps backbone, but one must be Master (CO mode) and the other is Slave (CPE mode).

To take advantage of the digital surveillance system and retain the benefits of UTP cable, the Extender helps the community, campus and businesses to upgrade analog camera system to IP camera surveillance without using additional new wiring. The VDSL Extender is a switching architecture with one RJ45 port and one Long Reach Ethernet interface. Just plug the IP camera's UTP cable into the Ethernet port and the existing UTP cable or telephone line into the UTP jack to easily implement and extend the distance of signal conversion by transmitting Ethernet data from the standard UTP cable.
Remember: 2 pcs. to make a data connection.

4 other products in the same category:

Ethernet over 2-wire...

Ethernet over 2-wire connection with VDSL. 10/100Mbit. 4 Ports Switch. Up to 1.4 km between 2 VDSL modules

Use VDSL connection over 2-thread cable where WiFi is an unstable connection

up to 1.4 km above eg. Conducted phone cable with 2 pcs. VDSL modules
Use 2 pcs. ETH-VDSL2+4+ or ETH-VDSL2+A and ETH-VDSL2+4+
Ethernet over 2-wire connection with VDSL
Ideal solution When the network distance is over 100 meters of border
ideal solution when a WiFi Link is an unstable connection
providing a transparent data connection
supply: 5VDC, 2A power supply included
DIP switch: VDSL connection must be set to CPE and the other for CO.
Prepared for your Montage, wall assembly. Your fittings are purchased
Order 2 pcs for a set.

Price 1,079.00 DKK
Product code: ETH-VDSL2+4+
On the way in  
Quick view
Ethernet over Coax cable,...

Ethernet over Coax cable, up to 2km. Master to Slave 1:1 up to 1:4. Minimum 2 pcs. to a connection

Break the 100 meter limit with VDSL over RG59 coax cable
1 x RJ45 10/100 Mbit
Up to 94 Mbit/s - duplex (automatic speed optimization)
Transparent (untouched) data connection
128-bit AES encryption
Frequencies: 2 - 28MHz
Same device can be Master or Slave (DIP)
Establishes even the best connection
Dimensions: 97 x 70 x 26 mm
Temperature: 0-50°C
5VDC 2A power supply included
75Ω cable must be used
Use 2 pcs. ETH-VDSL-RG for a point to point connection
Use 1 pc. Master for 4 pcs. Slaves - 1:4

Price 1,223.00 DKK
Product code: ETH-VDSL-RG
Physically in stock  
Quick view
Ethernet over 2-tråds VDSL,...

Ethernet over 2-tråds VDSL, up to 2km, pair of SFP module

2x SFP module for VDSL2Sold as a pair of 2 SFP modules, 1x receiver & 1x transmitter
Mounted in contacts with SFP slot
RJ45 connector (for 2 wires)
Up to 2 km, depending on the cable quality
Temperature: -20°C to 75°C
Power consumption of 3W from SFP port

Price 5,900.00 DKK
Product code: CNV-SFP-VDSL2-RC
Physically in stock  
Quick view